<fieldset id="6kimm"></fieldset>

Product Query

WeChat

Location：Products > Furnace > Tube Furnace

Products

< >

Name： TF1700 Tube Furnace

Model： TF1700

Introduction： 1700℃ single-zone tube furnace is used in sintering and high temperature heat treatment of metal materials, ceramic materials, nano materials, semiconductor materials, powder metallurgy and other new materials in colleges and universities, scientific research institutes, factories and enterprises, petrochemical, aerospace and other industries.

Parameter
Video
Test case
Clients

1700℃ single-zone tube furnace is used in sintering and high temperature heat treatment of metal materials, ceramic materials, nano materials, semiconductor materials, powder metallurgy and other new materials in colleges and universities, scientific research institutes, factories and enterprises, petrochemical, aerospace and other industries.

Furnace shell

The shell is made of metal Q235 low-carbon steel, and the surface is electrostatically resistant and resistant to corrosion.

The solid double-layer metal frame is combined with the heat-insulating fan structure, and the furnace surface temperature is low

Horizontal use mode, easy to operate

Refractory material

Multi-layer insulation design, composed of lightweight alumina ceramic fiber and high-quality insulation board backing, does not contain asbestos components, low heat loss and low energy consumption

Heating system

The high-quality Mosi2 heating element is safely and firmly installed on both sides of the furnace, and is heated by free heat radiation in the furnace cavity, which is energy-saving and efficient, and has a long service life

Heating on both sides (left and right sides), so as to achieve good uniformity in the furnace

Temperature Control Panel

PID and SSR control mode, precise temperature control

International standardized B-type Ni - Cr silicon thermocouple, temperature range 0-1800°C, long service life

Equipped with heating indicator light and over-temperature alarm buzzer

Program Controller

Advanced controllers that meet complex process requirements

Simple and direct operation, flexible programming

Programmable 30 program segments

Over temperature and fault alarm, automatic safety protection

Vacuum Atmosphere Function

With 304 stainless steel sealing flange to obtain vacuum or atmosphere in the furnace tube

High-quality quartz glass working tube, and metal or corundum working tube can also be selected to adapt to different working conditions

dapt to different working conditions

Specifications

Model	TF1700-I	TF1700-II	TF1700-III	TF1700-IV
Tube size	Φ50x900mm	Φ60x900mm	Φ80x900mm	Φ100x900mm
Max Temperature	1700℃
Working temperature	1600℃
Heating zone size	300mm
Power supply	220V/3KW	220V/4KW	220V/5KW	220V/5KW
Heating element	MoSi2
Furnace material	Polycrystalline inorganic alumina ceramic fiber material prepared by wet vacuum filtration
Furnace tube material	High purity corundum tube
Temperature control accuracy	±1℃
Temperature measuring element	B-type national standard platinum rhodium thermocouple
Temperature control instrument	Intelligent microcomputer PID temperature control instrument, SSR control, PID parameter self-tuning function; programmable 30 program segments, program temperature rise, program heat preservation, program cooling
Heating rate	1-15℃/min free adjustment
Furnace structure	Furnace temperature control integrated structure; double-layer shell, air circulation and heat insulation
Sealing performance	Both ends of the furnace tube are equipped with stainless steel metal flanges, matched with high-temperature PTFE gaskets, which can work under vacuum with a vacuum degree of ≤5pa (rotary vane vacuum pump)
atmosphere performance	There are air inlets and outlets at both ends of the flange. The pressure gauge is installed on the metal flange. The precision needle valve can adjust the air intake and output, and can be fed with protective gases such as nitrogen, argon, and hydrogen.
equipment protection	Modular control, sound and light alarm signal will be sent out for over temperature and broken coupler in the working process, and the protection action will be completed automatically
safety protection	The equipment is equipped with a circuit breaker, which will automatically pop open in case of short circuit leakage, which can protect the safety of equipment and operators
shell	High-quality cold-rolled steel plate CNC machine tool blanking processing, after welding, grinding, polishing, phosphating, pickling, surface electrostatic spraying plastic powder
The standard configuration	1. 1 furnace body 2. 1 temperature controller 3. Power cord 3 meters 4. 1 thermocouple 5. 1 manual 6. One furnace hook 7. One pair of high temperature gloves 8. Two pipe plugs 9. One set of sealing flange
Optional accessories	1. Optional rotary vane vacuum pump (vacuum degree ≤ 5pa) 2. Optional digital vacuum gauge ((1.0×105-1.0×10-1pa)) 3. Optional float flowmeter (range 60-600ml/min) 4 , optional corundum boat
Competitive Advantage	1、Factory direct delivery 2、Quality assurance 3、Best price 4、Compact in size 5、Complete specifications 6、Service Assurance